Product details
PS9035 Semi-Automatic Laser Tube Cutting Machine
- The front and rear double pneumatic chuck clamping design is adopted, and the rear chuck is equipped with a blowing device to reduce the slag attached to the pipe wall during the cutting process.
- The clamping force can be adjusted arbitrarily, and different forces can bear different loads to avoid the deformation of thin pipe clamps and loose clamps of thick pipes.
- With the fully automatic loading and unloading system, it saves labor costs and reduces the labor intensity of operators, making pipe cutting so easy.
- The operation is simple, and the machine can be remotely controlled for cutting, perforation, movement, calibration, emergency stop and other operations.
- Wireless handle control, free control of clamping pressure, convenient and practical, reducing pipe deformation
All kinds of groove, one-time molding
With groove cutting module, the cutting of groove can be finished in the blanking stage, which can save the working procedure and reduce the cost
Technical specifications
PS9035 Semi-Automatic Laser Tube Cutting Machine
| Model | PS6013 | PS6024 | PS6035 | PS9035 | PS12035 |
| brand name | Leading han | ||||
| Plate processing size | customizable | ||||
| Pipe processing range | 10-550mm | ||||
| Laser head brand | Raytools\Boci | ||||
| Laser source brand | RAYCUS\IPG | ||||
| Servo motor brand | DELTA | ||||
| Guiderail | On the silver | ||||
| Control system brand | Cyput | ||||
| Laser power | 1500W-12000W | ||||
| Maximum cutting length | 7500mm | ||||
| Cutting accuracy | ±0.05 mm | ||||
| Positioning accuracy | ±0.03mm | ||||
| Maximum running speed | 60m/min | ||||
| Maximum acceleration | 0.5G-1G | ||||
| Applicable Material | Round tubes, square tubes, special-shaped tubes, rectangular tubes, channel steels, I-beams, etc. can be cut into various shapes | ||||
Photo Gallery
Laser scan cut, full subversion
Ordinary cutting
The energy absorption rate is low in the cutting area
Scan cut
In the cutting area, the energy absorption rate is high
Schematic diagram of laser scanning cutting principle
Double the speed
The maximum cutting speed of the same thickness plate is increased
200%
No fear of high reaction
The batch processing of high anti-reflective material can be realized without any influence of backlight
Cut costs in half
The combined cost of gas and electricity is the highest
38%
Farewell to adhesion
Adjusting the movement amplitude of the dynamic facula greatly reduces the workpiece adhesion
A positive testimonial that you think will tell people how good you are. Some positive words from an existing or a past client make a lot of difference and boost conversions on your website!
Entrepreneur
A positive testimonial that you think will tell people how good you are. Some positive words from an existing or a past client makes a lot of difference and boosts conversions on your website!
Designer